Brady Bacon – Running the Speedweek Gauntlet!
(Bill W) July 10, 2013 – As the only driver to attempt the majority of Ohio and Pennsylvania Speedweeks and Indiana Sprintweek, times are busy for Brady Bacon. Last week, it was Pennsylvania, and he mixed a USAC start in Indiana into the mix. Tomorrow night, he’ll compete in the Brad Doty Classic at Limaland Motorsports Park before embarking on Indiana Sprintweek with the Hoffman Racing #69 team.
Last Wednesday found Brady at the Hagerstown Speedway in Maryland for Pennsylvania Speedweek. “We did decent qualifying, but other than that we weren’t too good,” he says of a night that ended with a DNF. “I ended up pulling out in the feature. The brakes were getting hot. I was actually feeling the heat.”
The Broken Arrow, Oklahoma driver flew to Lincoln Park Speedway in Putnamville, Indiana to drive the #69 machine on Thursday. He qualified fifteenth and ran second in his heat. “The track was rough and heavy to start the night,” says Brady. “We overcompensated for that, because it got really slick for the feature. We actually had a really good car in the heat. We just didn’t tighten up enough for the feature.”
Brady struggled in the feature, finishing 18th. “I got caught up trying to run the top a couple of times,” he says. :I biked up on two wheels and almost got over. I fell way back, and I just couldn’t get much going on the bottom. It was a combination of things. It wasn’t a good night.”
He would make his first ever start at the historic Williams Grove Speedway near Mechanicsburg, Pennsylvania on Friday. “The night started really good,” says Brady. “We qualified eleventh and started second in the heat race. We won by a straightaway, which there feels like ¾ of a mile!”
The main event would end rather prematurely. “We started second in the feature,” says Brady. “I think it was a combination of my inexperience there, and not being used to it. I think we had the car a little off too. I just spun out going into turn one on the second lap. The car was so winged out; it felt like the left rear was the only tire touching the ground. I just lost it and got into the fence.”
His early speed was not lost on the locals. “We did well the first half of the night and I think some were impressed,” says Brady. “Maybe next time we can get there and run a whole feature and see how it pans out!”
Pulling down a new #99 ride, the team headed to Port Royal Speedway on Saturday. “We had a few bugs with our new car,” says Brady. “We got it down from the trailer, and it was kind of a thrash. Some things get overlooked. I had a fuel issue in qualifying and the heat race.”
Through some trials and tribulations, Brady moved forward to a 13th place finish at the Port. “We had to start back in the feature, and traffic was getting pretty rough,” he says. “We broke a left rear shock, and I was kind of riding around. Eventually, we had a red and got it fixed. We had a decent car, but everyone was about the same speed the last half of the race.”
The team saw its share of rain. After getting rained out at Sharon and Fremont Speedways in Ohio, they were also washed away at Grandview Speedway and Selinsgrove Speedway this past Sunday. “I figured it up and we got rained out in 40% of the shows we tried to do in the Speedweeks,” says Brady.
After tomorrow night’s Brad Doty Classic, Indiana Sprintweek looms with USAC in the #69. The first half includes Gas City Speedway this Friday, followed by Kokomo Speedway Saturday and Lawrenceburg Speedway on Sunday. “I just hope the tracks are good,” says Brady. “They’ve struggled with some of their tracks in Indiana. I know some of them are doing some things, realizing they have an issue. Putnamville has some new equipment and so does Bloomington. They’re making an effort to give us a good track. I think it will pay off for them in the long run when they get good racing. I hope the fans can be patient sometimes too when the track needs reworked to give them a better show.”
Follow Brady on his Website, Twitter and Facebook!
Follow Brady at his website located at www.BradyBaconRacing.com! Also keep up with him on Facebook and Twitter (which also can be accessed at the website) at the following links…
Twitter Link – http://twitter.com/BradyBacon
Facebook Link - www.facebook.com/pages/Brady-Bacon-Racing/278125555137
Partner of the Week – Keizer Aluminum Wheels
We are the Keizer of Racing wheels!!! Keizer Aluminum Wheels Inc. is proud that in our 35 year history we are still 100% made in the USA. From very long and humble beginnings to our current Keizer state we have continued this practice. In 2009, we completed our onsite heat treat plant which allowed us to be 100% self sufficient. We thank all our customers that appreciate our hard work and sacrifices for speed in the USA. Don’t be stuck on a name; be stuck on product, service and the people behind it. Is the wheel of yesterday still slowing you down? Weigh us!!!!!! Don’t assume!!! Try us!!! Our wheels are designed for longevity and performance. Take a look at the leader in race wheel market of today! Visit Keizer Wheels online at www.KeizerWheels.com!
Associate Marketing Partner of the Week – Pattison Precision Products
Pattison Presision Products is an ISO 9000 compliant job shop. PPP recognizes not all manufactured products require the stringent aero-space requirements that can add to cost and lead times. Pattison offers high quality precision products with lower than average industry cost. They understand manufacturing is subject to program fluctuation. Pattison operations are scalable and able to adjust to customers' delivery needs. Pattison has a skilled labor force that continually acquires knowledge and adjusts to the latest equipment technology. Pattison will partner with a customer to help develop their latest projects or programs and has a reputation for working closely with customer engineering, giving manufacturing feedback that enhances customer design, ensuring accurate reproduction of follow on orders.
Pattison is a supplier for:
L3 communications
Flight Safety International
Rockwell Collins
Pattison is able to fabricate large full motion simulator platforms, to the smallest of MIL spec. piece parts, as well as cockpit structures for simulators like the T45, F18, A10, F16, F22, T6 and seats. Pattison processes allow a reduced cost and pass that savings on to its customers. Visit them on the web at www.PattisonCompanies.com!
Brady Bacon Racing would like the following sponsors for all their help: Fatheadz Eyewear, Oilfield Equipment and Manufacturing, Tel-Star Communications, PPM Titanium Products, Triple X Race Co., Competition Suspension, Smiley's Racing Products, Heath Clips Lawn Care, Keizer Aluminum Wheels, Tru-Square, Eaton Industrial Coatings, Pattison Precision Products, Wesmar Racing Engines, Butlerbuilt Seats, Hoosier Tire Southwest, Diversified Machine Inc., Brown and Miller Racing Solutions, Lightning Wings, Simpson, Pro Pan, CP Pistons, Schoenfeld Headers, Carrillo Rods, KSE Steering, All Star Performance, King Racing, Schroth Racing, FSR Radiators, Three-wide Clothing and Fuel Safe.
The Hoffman #69 sprinter is sponsored by Mean Green, Mopar, XXX, Hoosier, DMI, Lykins, Engler Machine & Tool, Goodridge Fluid Transfer Systems, KSE, MPD Racing, XYZ Machining, Saldana Racing Products, Fuel Safe Racing Cells, Fastener Specialty Motorsports, Wilwood Brakes, Joe Gibbs Driven Racing Oil, Zemco Headers, Chalk Racing Products and Weld.
Attached: Brady hopes to have all four wheels on the ground for Indiana Sprintweek (TJ Slideways Photo)
Bill W Media
Monroe, IA USA
Twitter: @BillWMedia
e-mail: sprntcar@iowatelecom.net
- Brady Bacon on Oct 16, 2013
- Article Date: 7/10/2013 by Bill W