Friday May 6th set the return to Manitowoc Speedway for the Manitowoc Mayhem event presented by STM’s own Scotty Thiel and his SixFour Promotions team. The Bumper to Bumper IRA sprint car series kicked off the final season of Manitowoc Speedway and it was a huge turnout! Things were going well for Thiel early in the night but throttle issues in the main event caused him to lose several spots in the main event. The team travelled south to Wilmot Raceway on Saturday night and Scotty had to do some chasing but managed to get his first hard charger of the season by advancing 13 positions in the main event.
30 cars signed into the pits at Manitowoc Speedway on Friday night. Scotty would be the 18th car out for qualifying. He laid down a 13.134 lap time which was 12th quick overall. That would go on to place him to start third in the heat race event. The field took the green and Scotty fed the bottom all race long and would battle for the lead for the first few laps. Patience’s was the key factor to the bottom groove and Thiel showcased that well as he took over the lead at the half way marker and never looked back. After 10 laps of green flag action, Thiel would take home the heat race victory and advanced him into the night’s redraw which would allow him to start in the top 10 of the A-main event. During the redraw session, the invert was picked and it placed Scotty to start on the pole of the 30 lap A-main event. The 24 car field saluted the fans by going four wide while fireworks launched into the air. Thiel set the pace down the backstretch and into turns three and four. He charged off turn four and the green flag flew. He continued to work the lower groove as he did in the heat race and it worked well as he led the first five laps of the main event. Lap traffic was approaching and Thiel had to switch up his line and would give up the lead. He battled back closely and it was a drag race off the corners for the top spot. Thiel eventually fell back to second as he moved up the track to avoid the lap cars. He charged back down to the bottom side of the track later on but would start to struggle with the throttle pedal sticking on him. Scotty was unable to have full throttle control and struggled to get back into a rhythm. After 30 laps of green flag action, Thiel would cross the finish line in the 6th position. “The car felt good early on in the race but my throttle started to stick a little bit as the race went on. I wasn’t able to control the car as much as I needed to do in order to run the bottom. After that happened I just wasn’t comfortable up top. Top 10 finish for the team but we were better than that. We’ll get it figured out and see what we can do tomorrow at Wilmot.” Stated Thiel after the event.
Saturday night the team headed south to Wilmot Raceway in Wilmot, WI. 35 cars signed into the pits and Scotty would draw and be the 34th car out for qualifying. The team knew it was going to be tough going out that late as the track conditions began to dry out but that didn’t stop them from charging hard. Thiel would go on to lay down at 14.103 lap time which was 7th quick! Thiel would go on to start fifth in the heat race event. The field took the green and they charged into turn one. Scotty fell back to the sixth position coming out of turn two and began to search for a line that would work for him. He slipped into the fifth position a few laps later and would maintain that spot until a caution came out with only two laps to go. On the restart, Thiel shot down to the bottom side in turn one and would end up going back to the sixth position. He tried to charge his way back but fell short at the line and would end up sixth, forcing him to come through the B-main event. The crew made some changes and the B-main lineup took the track. Scotty would start in the third position. Only the top four cars would go on to transfer into the nights 30 lap main event. The field took the green and drove off into turn one. The dry track conditions began to make things a little difficult in regard to passing. Thiel got held up on the bottom and fell back to the fifth position. He began to charge on the high groove and would drive his way around into the fourth positon. He maintained that for the remaining laps and would go on to transfer into the night’s main event. Scotty would have to start in the final 24th position and knew it was going to be difficult to move forward. As the field took the green, Scotty charged through the middle of the track and made several passes for position in the first lap. A caution came out on lap two and Thiel found himself moved up into the 18th spot. The car felt great and he showcased it well as they returned to green flag action and he began to continue his march forward. Thiel worked several grooves all race long and would continue to pass cars. After 30 laps of green flag action, Scotty charged his way up to finish in the 11th position, earning the hard charger for the evening. “Even though we didn’t capture a top 10 tonight it still feels pretty good. The team worked hard to get this thing set up good and I felt really comfortable. Starting in the tail is very hard so moving up 13 spots is nothing to complain about. Hopefully we can get a little bit of luck back on our side early in the night and start up front next time.” Scotty mentioned.
Next on tap for the #64 Scott Thiel Motorsports team is this coming Friday at Plymouth Speedway in Plymouth, IN racing with the Craftsman World of Outlaws and then the team will follow that event up with a trip to Beaver Dam Raceway in Beaver Dam, WI on Saturday night with the IRA Sprint Car Series.
Keep up to date on all of Scotty’s upcoming events on www.scottythiel.com and also on the Scott Thiel Motorsports social media pages, www.facebook.com/ScottThielMotorsports. The team will be doing random Live Feeds throughout the race nights, giving race fans the chance to view what happens behind the scenes and also live race action if you aren’t able to attend the events.
Scott Thiel Motorsports would like to thank all of their great marketing partners for the 2016 racing season and encourages everyone to check out these fine companies! Please support the people who support racing!
Professional Plating Inc:
Professional Plating Inc., specializes in multiple types of metal coating and plating projects. They also offer custom powder coating, ceramic coating and internal engine coating. Have a metal coating or plating project you need done? Check out Professional Plating Inc. at www.proplating.com!
Scott Thiel Builders:
Since 1985, Sheboygan, Wisconsin based Scott Thiel Builders has been in the new home building and remodeling industry serving clients all over the central lake shore counties of Wisconsin. Our outstanding reputation speaks for itself through our skilled craftsman who strive for perfection to create a masterpiece you have dreamed about. Attention to detail is used in a variety of ways at Scott Thiel Builders because we not only strive to achieve excellence on each project we work on but to also be attentive to our client and make sure they experience the best possible service through the entire building process and the years to follow. Check out what Scott Thiel Builders can provide for you today at www.scottthielbuilders.com!
Complete Water Inc:
Complete Water Inc specializes in Rentals, Iron Filters, Well Inspections, Salt Delivery, Sales, Drinking Systems, Complete Well Systems, Bottled Water, Reverse Osmosis, Irrigation & Sprinkler Systems, Well Systems, Well Pumps & Pressure Tanks, Rheem, MacClean, and American Standard. Contact Complete Water for any of your water needs!
SixFour Promotions:
SixFour Promotions is a motorsports marketing company driven toward promoting motorsport events and helping drivers/teams seek potential marketing partners. From marketing proposals to full event promotions, SixFour Promotions knows what it takes to have complete marketing success. To learn more about what SixFour can offer you, look them up on www.facebook.com/SixFourPromotions
VMS Motorsports:
VMS is a family business established in 2007 and has evolved into one of the leading suppliers of rod ends and radius rods in the racing industry worldwide. From Midgets to Modifieds, Legends to Late Models and everything in between, VMS Motorsports has you covered. Individualized customer service ensures that every one of our customers gets the right piece for their application. VMS Motorsports always keeps a full inventory on hand even through the off-season. This, coupled with our Monday-Saturday shipping, ensures that VMS Motorsports gets you back on track…FAST. If you are in the market for Rod ends, radius rods and many other racing products, check out what VMS Motorsports has to offer by checking them out online at www.vmsmotorsports.com!
Hepfner Racing Products:
For well over a decade, Hepfner Racing Products (HRP) has led the industry in innovative designs and manufacturing technology. From a wide range of racing components to a full line up of trailer accessories, HRP offers a large variety of items for virtually every form of motorsports. HRP is also the manufacturer of Streeter Super Stands, the original and genuine home to kart racing's Big Foot and Stacker Stands as well as a very popular lineup of full kart racing pit & trailer accessories and kart stands. We are proud to design, manufacture, package and ship all of our products from our Hartford, WI USA facility. To learn more on what HRP can offer you, check them out on the web at hrpracing.com!
QTM Brakes:
Innovations in braking since 1999 has led QTM to be one of the top brake companies in the business. From open wheel, off road, late model racing and street vehicles, QTM provides a wide range of brakes and accessories for all applications. Their innovated technology allows the brakes to be the best in the business and the stopping power is incredibly noticeable to drivers in all platforms. Check out www.qtmi.com for more information!
Triple X Race Co:
At Triple X Race Components, we don’t just build race parts – we race too. We know how expensive it is to race. That’s why we offer the most common Sprint Car, Midget, and 600 Mini Sprint parts. We keep our costs down by building thousands of each part. We build the parts that get damaged the most. With our discounted pricing, you can afford to race hard and race to win.
Ti22 Performance:
Ti22 Performance is the leading manufacturer of high-performance titanium race parts. Focused on the Sprint car and Motorsports industry, Ti22 offers drivers a superior line of products that outlast and out perform the competition. Check them out at www.ti22performance.com!
Torsion Bar Rate:
Torsion bar testing has been around as long as the bar has. There are many different ways to test bars, but they all have the same goal.... to compare one bar to another and give the results in a numerical value (PSI, FORCE POUNDS, RATE). This is good, but can be hard to understand. We simplify this process. The numbering system we use is standard to the torsion bar industries. During our test sessions, data is collected and stored in our software, which then calculates it to a torsion bar size that everyone can understand. We have found 1025 bars that test between a 1012 and a 1036 bar. Our test services take away the guesswork. We provide you with a TORSION BAR RATE. Check out www.torsionbarrate.com for more info!
Rhey Graphics:
Rhey Graphics will take your next project over-the-top. We can supply you with the creative edge that's become a necessity in today's competitive marketplace. So whether it's a logo design, vehicle graphics, brochure, or full-color banner, we can handle your project from start to an outstanding finished project.
Vahlco Racing Wheels:
VAHLCO RACING WHEELS is a newly formed aluminum racing Wheel Company based in New Egypt, NJ focused on producing dirt oval track wheels to the highest standards of quality, durability, usability and precision. Dirt oval track racing and grassroots efforts is what racing in the United States was built on and it is our mission to produce, quite simply, the best wheels. Other companies may be the household name every racer knows, but Vahlco is ready to set the new industry standard. We are RACERS. We are DRIVEN. We are READY. Vahlco Racing Wheels. Made by RACERS for RACERS. Check them out at www.vahlco.com!
Super Shox:
Since 1997 Super Shox has been dedicated to building high performance shock absorbers with extreme durability at a reasonable price. Each year more racers make the switch to Super Shox and it shows with wins and championships. Super Shox have high quality products that will give you an advantage. Besides building a quality product customer service is at the top of our list to keep you satisfied and winning races. Please give us a call or e-mail to discuss how we can serve your needs. 847. 548.SHOX
Photo Credit: Jeff Burba Photography
- Scotty Thiel on May 10, 2016
- Article Date: 5/10/2016 by SixFour Promotions